English 
Spanish 
French 
With 12 years of industry experience, we offer professional technical support and focus on the customer experience.
Kylin Series Controller
Kylin Series Controller
SW200 Intelligent Networking Traffic Signal Controller
- Powerful computing and communication with advanced ARM 32-bit chip.
- Higher running stability with SCR control on traffic signal outputs.
- Easy extension and compatibility with open NTCIP communication protocol.
- Accurate timing with GPS.
- Networking for remote control and monitoring.
- Multi working modes – fixed time, pedestrian request, green wave, actuated and manual control.
- Wiring terminals for both main and spare power supply for easy connection with electric generator during power failure.
- Easy assembly and maintenance with modular designed control boards and driving boards.
- Built-in led lamp for night operation and maintenance.
Share to:
Overview
SW200 is a 48 outputs intelligent networking road traffic signal controller, equipped with 32-bit ARM microcontroller, 6U modular designed control boards and driving boards, and 19 inches standard rack-mounted case. It adopts standardized NTCIP communication protocol, which supports network remote control and a variety of control strategies.
Hardware Composition
SW200 Traffic signal controller is composed of main control board, signal driver board, detection board, backplane, rack-mounted case, power supply, power distribution and outer cabinet.
SW200 Intelligent Networking Traffic Signal Controller Parameter
Outer Cabinet
- Parameter: 19 inches width, made from sheet metal with plastic-sprayed surface.
Power Distribution
- Parameter: Main/spare power supply switch, surge protector, MCB（Miniature Circuit Breaker）, mains voltage outlet, signal output terminals with fuse, ground terminal.
Rack-mounted Case
- Parameter: 6U rack plug-in structure, aluminum alloy material, pluggable control board and signal driving boards.
Power Supply
- Parameter: Wide input voltage: AC85V-265V, 50/ 60Hz.
Main Control Board
- Parameter：ARM main control board with color LCD display (Resolution :128*64).
- Note: With GPS.
Signal Driver Board
- Parameter: 12 signal outputs per board, with current and voltage detection.
- Note: Standard with 4 signal driver boards, extensible to 8.
Detection Board
- Parameter: Vehicle detector interface board, with 32 – I/O signal inputs.
- Note: Optional.
SW200 Intelligent Networking Traffic Signal Controller Electrical Parameters
Traffic Signal Outputs
- Parameter: 48 signal outputs =16 signal groups.
- Note: Extensible to 96 signal outputs = 32 groups.
GPS
- Parameter: GPS accurate timing.
Standard Interface
- Parameter: 1-network, 1-RS485, 2-RS232, 8-I/O inputs (pedestrian request), 2-I/O outputs, 1-USB.
Extensible Interface
- Parameter: Extensible 32-I/O signal inputs if with optional detection board.
Working Voltage
- Parameter: AC85V-265V, 50/ 60Hz.
Working Humidity
- Parameter: <95%, No condensation.
Working Temperature
- Parameter: -40℃ ～+70℃.
Power Consumption
- Parameter: <30W.
Dielectric Strength
- Parameter: >10MΩ.
Ingress Protection
- Parameter: IP54.
