Wiring Arrangement Method of Led Traffic Signal

Ⅰ. The importance of LED traffic signal lights


Intelligent transportation is the development direction of the future transportation system. Intelligent transportation effectively integrates advanced information technology, data communication transmission technology, electronic sensor technology, control technology and computer technology in the entire ground transportation management system. What it establishes is a real-time, accurate, and efficient comprehensive transportation management system that works in a wide range and all-round way. Among them, the most important thing is the use of traffic lights.


LED traffic lights are an important part of traffic signal command and the basic language of road traffic. Traffic lights are placed at intersections in every city by urban planning. It is precisely because they direct traffic day and night that traffic can remain stable and unobstructed. LED traffic signal lights play an irreplaceable role in urban traffic command.


Ⅱ. Route layout method of LED traffic signal lights


LED traffic lights play an important role in our modern life, so there are high requirements for product quality. Therefore, we must take certain precautions during production and installation. The installation of traffic lights is similar to the LED street light, but there are some aspects that require special attention. The eight precautions for installing LED traffic lights are things that our staff need to pay special attention to. This is the prerequisite to ensure the quality of their installation.


The layout method of LED traffic signal lights:


1. The circuit layout of LED traffic lights must first understand the circuit board, you must understand the manufacturing process, and can make a simple circuit board by hand.


2. It has the ability to detect traffic signal components. During the installation process, a large number of components need to be installed, so the installation program must identify various components.


3. The circuit layout of LED traffic lights has debugging function. After the installation is complete, you need to debug whether it can be used normally, so the installation program needs to master the debugging function.


4. Bench drills, toothless saws, cutting machines and other electric tools used for processing are all equipped with leakage protection devices. Before using the testing machine, the operator should wear protective glasses.


5. In the storage area of resin glue and paint, fire sources should be eliminated, and sufficient fire fighting equipment should be placed. When painting, please wear a protective mask and take a break for continuous ventilation for 2 hours.


6. The scaffolding should be firmly installed and used after inspection. The load used must not be concentrated and must not exceed the design load.


7. If there are strong winds and rain or snow above level 6, all high-altitude operations should be stopped.


8. In addition to the above, air operations should also comply with relevant safety regulations.

Related Product

  • Contactless Pedestrian Push Button Contactless Pedestrian Push Button
    Capacitive button and mechanical button combined in a solid moduleHumanization design with back-light words and voice prompt Real-time counting for the remaining red and green time IP65 protection level
  • M1 Series LED Street Light M1 Series LED Street Light
    Universal voltage AC100-277V 50/60Hz. External 10KV,20KV surge protection. Using high quality SMD3030/5050 chips, High Efficiency 110-150lm/W. High Power Factor >0.9, Low THD Driver. Die-Casting ...
  • 200mm/300mm Square Countdown Timer Traffic Light 200mm/300mm Square Countdown Timer Traffic Light
    Application – junction traffic signal counting Available in learning, triggered or communicative version Ability to be synchronized with any traffic signal controllerWide operating voltage adapting to ...